The aim of this project was to produce a reliable, high-tech smart walking stick. Which is capable of detecting objects (static or dynamic) and alert the user using vibration & sound. All the data acquired should be stored in a database for medical analysis. Project Report & Log Powered By EmbedPress
I made a simple this simple setup to monitor my rooms temperature during gaming. And see how much of an effect my PC has to heating my room. At the moment it just shows the current values. Moving Forward I plan to use NodeMCU ESP8266 SoC (system on a chip) to take take the temperature
Introduction This project in a nutshell: Controlling an Arduino micro controller from a web interface. Therefore control any electrical device from anywhere with internet. I wanted to stretch my understanding on programming and web development and what better way to do this then doing a simple but effective project. The hardware is kept at a
Robot Build The PCB was designed using pads logic PCB design software. Since we were first year students extensive help was provided. The arduino uno shield was assembled in the engineering lab. The shield consisted of full H-bridge IC chips to control the dual motors on the robot. It also had a sensor daughter board
Video shows earlier development of the project where it only had an single LED. The project was later improved to work with 5050 RGB programable neo pixel strip with minor changes. This project took only few days and I was extremely inexperienced back in 2017. https://www.mahmed.tech/wp-content/uploads/2017/04/BLE-Light.mp4 Bluetooth controlled RGB light using the arduino Bluetooth module